Vibration monitoring during caisson installation beside occupied buildings
Drilled caisson foundations for a new building on a tight urban lot · Private developer · New York, NY
Seismographs placed on the neighboring buildings, notify and stop-work thresholds set from the project specification, and readings reviewed daily while the caissons were drilled and cased. Alerts went straight to the superintendent, and the monitoring record closed out with the foundation work.
Support of excavation and adjacent-building monitoring — affordable housing
Mid-rise affordable housing with a full-depth cellar · Housing developer · Bronx, NY
Excavation beside occupied neighbors. Pre-construction condition documentation, vibration and movement monitoring on the adjacent structures, and inspection of the support-of-excavation installation against the approved design.
Subsurface investigations for a senior-living portfolio
Several senior-living and assisted-living sites · Private owner-operator · Bergen and Passaic Counties, NJ
Boring programs scoped site by site, drillers directed in the field, soils logged and sampled for laboratory testing, and the data assembled for foundation design on each building.
GPR scanning and post-installed anchor inspection — occupied hospitals
Renovations inside operating hospitals · Healthcare system · New York, NY
Slabs and walls scanned for reinforcement and conduit before coring and anchoring, locations marked for the trades, and post-installed anchors inspected, all worked around patients, infection-control barriers, and off-hours schedules.
Concrete coring and strength evaluation — parking garage
Existing cast-in-place parking structure · Private owner · Manhattan, NY
Core locations laid out with GPR to miss the reinforcement, cores taken from slabs and beams, and compressive strength tested to ASTM C42, with the results reported for the structural evaluation of the deck.
Steel splice connection design — airport terminal concourse
Food-service build-out in an active terminal concourse · Terminal tenant, through the general contractor · Queens, NY
Moment splices for cantilevered steel beams inside an operating airport terminal: slip-critical, tension-control bolted web and flange splice plates and welds, designed to AISC 360 and RCSC. Carried through seven revision cycles with the engineer of record and approved for fabrication as a sealed calculation package.
Geotechnical program for more than thirty infill building sites
Small and mid-size infill buildings across the city · Private developers · New York, NY
Borings, groundwater observations, and laboratory testing on more than thirty infill lots in one year, each reported in the format the design team and the building department expected.
Pile installation inspection and driving records
Driven-pile foundation for a new building · Developer · Queens, NY
Full-time observation of pile driving: hammer and driving criteria verified, blow counts and set logged pile by pile, and out-of-tolerance piles flagged to the geotechnical engineer of record the same day.
Violation removal — interior stair and fire escape, multifamily building
Three-story multifamily building, wood stair and three-level wood fire escape · Private owner · Essex County, NJ
State housing-code violations called for an engineering report on an interior stair to the roof and a three-level wood fire escape. Field investigation, load checks to the IBC, NJ UCC, and ASCE 7, an unsafe-condition notice to the owner, repair details for the permit, review and acceptance of the contractor’s temporary shoring, and a final inspection and conformance report to close out the violations.
Geotechnical investigation and earthwork testing — logistics warehouse
Large-footprint warehouse on soft meadowlands soils · Industrial developer · Meadowlands, NJ
Soft organic soils under old fill. Subsurface data for foundation and slab design, then compaction testing and field observation as the building pad was placed.
Subsurface investigation for tolling-structure foundations
Roadside gantry foundations in a dense street grid · Transportation agency · Manhattan, NY
Borings at gantry locations in active streets: utility clearance, traffic and permit coordination, and logs and samples delivered for foundation design on a public program.
Geotechnical and materials work on active military installations
Facilities on two active installations · Federal (Department of Defense) · New Jersey
Field investigation and testing under installation access, escort, and security rules, documented to federal quality-assurance requirements.
Test pits and infiltration testing for stormwater design
Residential and commercial site development · Developers and site engineers · Northern and central New Jersey
Test pits logged at the proposed basins, soil and groundwater conditions recorded, and field infiltration tests run to the reviewing agency’s method, reported for the stormwater submission.
Structural steel, bolting, and concrete inspection — sixty-story office tower
Supertall office headquarters · Corporate owner · Manhattan, NY
Special inspections on structural steel, high-strength bolting, and concrete through a fast erection sequence, with reports filed daily so the next floor was never waiting on paperwork.
Special inspection and materials testing — public school program
New schools, additions, and capital upgrades · City school construction authority · New York, NY
Inspection and testing across multiple school projects under an agency program, documented to the authority’s quality-assurance requirements.
Special inspection — academic building addition for a public college
New academic building on an urban campus · State facilities authority · Manhattan, NY
Special inspections and materials testing on a new academic building, delivered under a state authority’s documentation and quality-assurance requirements.
Construction materials testing — multifamily and senior-living buildings
Multifamily and senior-living buildings · Developers · Northern New Jersey
Soils, concrete, and masonry testing and special inspections from foundations through framing, with field results to the contractor the same day.
Inspection and testing — interceptor sewer
Large-diameter municipal interceptor sewer · Regional utility authority · Passaic County, NJ
Backfill compaction testing, concrete testing, and field documentation along the sewer alignment, coordinated with the contractor’s daily sequence.
Materials testing and inspection — municipal public works garage
New public works facility · Municipality · Bergen County, NJ
Soils, concrete, and structural inspections and testing for a new municipal garage, documented for the construction official and the design team.
Geotechnical and materials testing — power generation facility
Equipment foundations and site work at an energy facility · Energy company · Middlesex County, NJ
Testing and field observation for equipment foundations and site work on an operating energy site, under the facility’s safety and access rules.